Secure Checkout
Maxair Predator Pro Kit : Yamaha V Star 1100- ( Includes Euro: Drag Star) All Years - All  models

Thumbnail Filmstrip of Maxair Predator Pro Kit : Yamaha V Star 1100- ( Includes Euro: Drag Star) All Years - All models Images

    Purchase Maxair Predator Pro Kit : Yamaha V Star 1100- ( Includes Euro: Drag Star) All Years - All models

    SKU: MK-YVS1-P Maxair Predator Pro Kit : Yamaha V Star 1100- ( Includes Euro: Drag Star) All Years - All models

    Rated 5/5 (110 review s)

    $268.00 $288.00
     
    Sign up below with your email to be notified when this product is back in stock!


    Complete Kit Includes:

    • All the Pilot & Main Jets you will need*  (*major engine mods will need optional Predator Pro Bump Kit)
    • Maxair Predator Slide Needles
    • Aluminum Milled Filter Adapters
    • PCV hook-up w/ PCV valve
    • 2- Air Filters
    • Replacement socket head Float Bowl Screws
    • Drill Bit & Screw for Pulling Pilot Mixture Screw Cap
    • Compltete Full Color Instructions
    • Tech support 
    • Maxair Sticker

    "BOLT-ON POWER- Maxair ... Delivers"- RoadBike Magazine

    This kit is custom made for your Yamaha V Star 1100 (also known as the Drag Star 1100 overseas)  to eliminate its restrictive stock air-box and allow increased air flow to the carburetors. The Maxair Kit for the V Star 1100 Yamaha will improve your entire power-band with up to a 20% increase in torque and horsepower (or more). Easy installation and our Award Winning Technical Support, guarantee that your Beast will be Unleashed in mere days!

    • Turn Key install (complete kit with full color detailed instructions)
    • Best tech support in the industry
    • Cross-Over Max-Tube (balances filters - increased volumetric efficiency)
    • Positive Crankcase Venting (pulls moisture & gasses: cleaner oil- creates negative pressure under pistons for more power)
    • Anti Reversion Milled Aluminum Adapters - (reduces reversion -increased volumetric efficiency)
    • High Flow K&N Lifetime Filters (same filters used by a major racer on a Road Star Warrior 1700cc)
    • Up to 20% (or more) increase in power over stock (with aftermarket exhaust)

    Filter Crossover Max-Tube (picture below) link the two  filters balances them and increase flow and volumetric efficiency. This gives you the benefits of individual filters with the balancing effect of stock system !!

    Our unique Positive Crankcase Ventilation feature "pulls" harmful moisture and gases out of crankcase and burns them in the combustion chamber. This results in cleaner oil and longer engine life with no harm to the carburetors. This is also the cleanest running system for your bike as well as for the environment....This system also eliminates the smell of these gasses while riding.

    Also includes our custom machined, high velocity, anti-reversion filter adapters. It is our opinion that these adapters help to reduce the effects of reversion and increase air velocity.

    Includes all the jets and everything you need. You can leave your stock round air box in place for looks.

     

     Installed kit side view (pictured below) - our filters are well protected nestled up under the gas tank.. They are not seen when the tank is installed. 

    Maxair Engineering has been recognized as an industry expert on the Yamaha V Star 1100 - Our products (including the Predator Pro) are sold and installed by Yamaha dealerships around the country!

    Products we highly recommend to go with the Predator

    • The Predator Maxmix Thumb-Screws- This makes adjusting the hard to reach the idle mixture screws a breeze.
    • Max-CSR kit  - If your bike is 2006 and newer (California 2004 or newer) we highly recommend this addition for best performance.

    Now with greater jetting range! This is the next generation with our new adjustable needles. Our needles allow for tighter jetting tolerances. We saw improved throttle response and a 4 HP increase over the standard kit !!!

    Our Predator Pro jet kit now comes with an expanded jetting range. If you have modified your engine you can purchase an even more extended range here . Unless you have modified your engine you will not need this extra range. 


    FAQs

    • What is the Maxair Predator Pro and why should I purchase it for my V Star 1100: The Predator Pro is a filter system that eliminates the stock restrictive air chamber and snorkel under the tank, allowing for maximum airflow and power gains. This kit has become well known among V Star 1100 aficionados, as the must have for the best power, while retaining real world drivability. 

    • Is the Predator kit is both an air filter system and a re-jetting system? Yes it is a complete system, with everything you need (minus tools) for install and tuning. Also included, are full color instructions and access to our technical support forum where we will "hold your" hand through the install process.
       
    • I have heard about "POD kits". Is this a POD kit?  No our system is not a "POD kit". POD kits are put together "ad hock" using the stock needles and no Cross-Over tube. The Predator Pro kit is a proven system that has been Dyno and road tested to make sure all the components work together to achieve optimum performance. Don't be fooled by  imitations!!

      The heart of our system are the Predator Pro Needles, our Anti-Reversion Adapters, Cross-Over Max-Tube and our Positive Crankcase Vent System. The Predator Pro needle was specifically designed for the Predator system allowing for best performance, drivability and gas mileage. The stock needle was designed for a stock bike to satisfy EPA NOT for best performance when you eliminate the stock are system. 

      Our anti reversion adapters increase air velocity and reduce reversion thereby increasing volumetric efficiency and power. There is simply no comparison to POD kits that use the stock needles and misc. parts.

      Our kit has also been made turn-key and we provide proper technical support. Our filters and adapters are designed to give the right flow and decrease reversion to provide the best performance.

       
    • How much of a power increase can I expect with the Predator Pro?  Please see the side by side Dyno charts on our website done by RoadBike Magazine. With a good aftermarket exhaust you should see a 20% increase over stock and often times better depending on the exhaust used.
       
    • I have a Maxair Predator purchased before 2006, is the Predator Pro a new version?  Yes it is. The Predator Pro is the latest evolution of our legendary Predator kit providing even better power and throttle response.
       
    • How is the Predator Pro different:  The major difference is our new proprietary Predator Pro needle. The old style Predator used the stock needles which were designed to be used with the stock air system. We custom designed the Predator Pro needles especially for our air intake system, to offer better throttle response and general performance. Our test-bed V Star 1100 gained 4 hp over the old style Predator.
       
    • Will the kit come with the exact size jets needed to be compatible with my exhaust system?:  Yes, the is very complete, with everything you need for ALL exhaust setups. Some major engine mods. may require the Jet Bump Kit which gives you extra jetting. If your bike does not have major engine mods you will be good to go. If you have cams or HC pistons you may want to purchase the Predator Pro Jet Bump Pak for an expanded range of jetting https://www.maxairengineering.com/mm5/merchant.mvc?Screen=PROD&Product_Code=JUC-1100PRO
       
    • Does the installation of the kit require any irreversible changes to the existing parts, especially the carburetors?  For example, to install the new jets, does any drilling need to be done that would prevent a return to the original equipment sometime in the future? : No, the only drilling that is done is to remove the plug the covers the idle mixture screw so you may adjust them. This can easily be adjusted back to stock and the plug is completely unnecessary.
       
    • Do the carburetors need to be re-jetted with your system and aftermarket pipes are installed? : Yes, you do re-jet and we give you everything you need for a stock engine (extra jets can be purchased for bikes running aftermarket cams and/or High compression pistons)
       
    • Does the stock air filter cover remain on the V Star 1100 for aesthetic purposes once your new Predator system has been installed?: Its your choice. Our filters are hidden under the tank so you can leave the stock doughnut cover in place for looks or you can remove it for a cleaner look.
       
    • I would like to know if there is any power increase if I use the stock exhaust?  Yes you will see a noticeable gain in power. Not as much as you would see with a full system though.. We recommend a 2 into 1 exhaust for best performance. Slip-ons are a reasonable low cost option that will give you a tremendous power increase with the Predator Pro.
       
    • Will installing the Predator kit have a negative effect on my warranty:  No, This is a myth sometimes perpetuated by certain dealerships. See: Magnuson-Moss Warranty Act.  We have dealers that install our air kits before the bike has even been sold to increase its selling potential. Often times a customer will purchase a bike and the have the dealer install our air kit and a set of pipes right off the showroom floor!
       
    • Does your kit use K&N filters, what is their life span and how often do the need to be cleaned: Yes, we use top of the line K&N filters that are guaranteed for a million miles. We recommend cleaning your filters at your 8000 miles valve adjustment, when you have your tank off anyway. If a filter should ever be damaged we will supply you a replacement, for a nominal cost. It would be very rare and unlikely to damage one however. ONLY use K&N Filter Recharger kits to clean and re-oil your filters.
       
    • I have another air kit on my bike now. Can I leave this on for looks after installing your product?: Yes you may and this is a great way to go. "The Maxair for Go, the others for show!" 
       
    • What are these Predator Maxmix Screws and why should I purchase them? The Maxmix screws are thumbscrews that eliminate the need for a screwdriver when making adjustments to your idle mixture. We highly recommend these with the Predator Pro for ease of tuning. Please see above for more info on those.
       
    • I ride in the rain quite often. Will rain be an issue with the Predator Pro?: No, rain will not be a problem at all. We have never had a complaint or issue due to rain with the thousands of bikes that this kit has been installed on. We have ridden our own test bike daily through torrential downpours with no problems at all.
       
    • What gas mileage can I expect with the Predator Pro? The average is 42 to 48 mpg. 
       
    • Are these filters large enough for this application? : Yes . These are the size as the filters commonly used on the 1700cc Warrior. They provide more CFM than you will ever need. Remember, a filter too large can cause a decrease in overall performance and torque. Also our filter s designed for optimal flow while preserving proper filtration and together with our adapters reducing reversion for better torque in the lower rpm range.
       
    • Can I install this myself? :  Yes, most certainly. If you can change your oil and can follow instructions, you can do this in about 4 hrs. If any issues come up we are available around the clock on our technical support forum to "hold your hand" through the install process.
       
    • What tools will I need for this project. : You will need a basic set of screwdrivers, sockets and wrenches. Also a clean work area. You will need a way to adjust the float level which can be done with a metric caliper. After the install you should synchronize your carburetors. You can purchase the SyncPRO CARBURETOR TUNER by Motion Pro or you can make your own very cheaply with instructions found on our technical support forum. Synchronizing your carburetors is a regular maintenance item that should be done periodically on and bike with multiple carburetors so this is a good tool for future use.
       
    • I am concerned about adjusting my float level. Should I be and is this necessary? Adjusting your float level is a very simple job. We have full color instructions on our technical support forum on how to do this simple procedure. We have gone to great lengths to make this a very simple task. As a result t is the easiest part of the install process and should not take more than 10 minutes. We also have a video on our tech support forum to guide you.
       
    • My bike has already been re-jetted with another kit. Will I need to re-jet again? Yes,  you need to re-jet using the jets we provide to accommodate the Maxair Predator Pro needle and the huge increase in air flow and power.
       
    • Can my local dealer install this for me? Yes - Anyone who can read and follow instructions can install the Predator Pro kit.
       
    • Are there any customer reviews I can read on the Predator Pro?  Yes!  In fact MOST of our sales of the Predator Pro Kit come from happy customers telling other V Star 1100 owners. Please read the many testimonials in the review section below. 
    What our customers are saying:

    The Maxair Predator Maxmix Thumb-screw(Optional add-on)

    IMPORTANT: DOES NOT INCLUDE Factory O-ringSpring or Washers (these you will re-use from your existing factory screws.)

    We specifically designed to work w/ our Maxair Predator Pro Kit.

    Sold as a Set of 2

    The V Star 1100 Predator Maxmix idle Mixture Thumbscrew. The Predator Maxmix Screws promises to be the industry benchmark in quality and ease of use.

    • Longer shaft for ease of adjustment
    • Jeweler quality straight knurling
    • More threads and tighter tolerances to fit carburetor and eliminate movement from vibration
    • Parabolic dished head reduces weight and vibration 
    • Uses OEM Spring, O-ring and Washer (not included)
    • NOTE: The OEM screws have small variances in dimensions from year to year. This has no effect on performance. These work for ALL VStar 1100s & Drag Star 1100s

    The Maxmix Idle Mixture Thumbscrew for the V Star 1100 allows you to adjust the pilot mixture circuit on the fly. Handy for fine tuning changes in weather, temperature or for changes in altitude.

    Fits all Yamaha V Star 1100s

    The Idle Mixture Screw is the most common adjustment, needed on your motorcycle's carburetor.

    Adjusting this screw properly, can compensate for changes in altitude, weather, temperature etc.

    Proper adjustment, to meet changing conditions can drastically improve drivabilty and performance, as well as reducing gas consumption and wear and tear on your motor.

    Imagine being able to adjust your idle mixture on the fly - without a screw driver. Well now you can with the NEW Maxmix idle Mixture Thumbscrews!!


    "BOLT-ON POWER- Maxair ... Delivers"- RoadBike Magazine

     

    Read the article Click Here   

    RoadBike Magazine's Dyno test of the Standard Maxair kit (images and article courtesy of RoadBike Magazine)

    The chart below shows a "bone stock" V Star 1100 as tested by RoadBike Magazine using our Maxair Predator.

    The results in the are typical but we have seen better power increases base on the type of exhaust used!

    Peak Horsepower: Before: 51.7 - After: 61 !

    Peak Torque: Before:55 - After: 64 ft lbs !

    Belo is the RoadBike Dyno before & after after installing the Maxair Predator and a 2 into 1 Classic Exhaust system

    Disclaimer: Any modifications to intake or exhaust systems on some vehicles may not be legal in some jurisdictions. Please check with your local authorities for specific legal standards. The Maxair Predator Kit is not EPA or DOT approved. Designed for off-road competition use. Purchaser is responsible for proper installation and tuning.


    Technical Support 

    MOST of our sales of the Predator Pro Kit come word of mouth recommendations. we have a vested interest in you having the best experience possible with our product, after the sale. You, are our best salesperson!

    At Maxair Engineering we pride ourselves on having the best support in the technical support industry! Since most of our customers install this product themselves, we have earned a reputation for fast reliable technical support.

    Technical support for the Maxair Predator Pro can be found on our Technical Support forum: The Maxair Garage

    The Maxair Garage is a private technical Support forum for customers to receive technical support and expertise. You will find all the help and information you need. There are links, videos and much more to assist you though the install.

      

    Screen-Shot of the Maxair Garage Technical Support forum

    I couldn't believe I was riding the same bike! The power increase was incredible! I did the work myself. The tech support was second to none and the instructions were very easy to follow. The bike pulls hard in every gear, no backfires or hesitation. Can't say enough. Buy this, you won't regret it!    Customer: Scott Caywood (Hutchinson, KS)

    Customer Reviews


    Review Maxair Predator Pro Kit : Yamaha V Star 1100- ( Includes Euro: Drag Star) All Years - All models
    5/5 Stars out of 110 Reviews
    1
    0
    2
    0
    3
    0
    4
    0
    5
    110
    Pages 1   2   3   4   5
    Verified Buyer
    I cracked the throttle!!
    5
    B. Serrano (Oxnard, CA) | October 2nd, 2012
    after installing the kit ,I took it out for a test ride the next day.Man!!!! What a difference! Not to mention the engine ran cooler.I will get the mini coils and the flamwire next.Thanks brother your product is great!!!
    Verified Buyer
    I'm impressed!!!!!!!
    5
    B. Serrano (Oxnard, CA) | September 22nd, 2012
    I installed the kit this afternoon .The instructions were great!!Clear and easy to understand.The extended mixture screws make adjustments a breeze.
    Verified Buyer
    Just what my bike was missing
    5
    ryan t (maricopa, az) | June 1st, 2012
    was going to go with a hypercharger, but glad i didnt. i didnt realize my bike could accelerate this fast. easy install, great direction, just pure awesome
    Verified Buyer
    same bike, different breed
    5
    michael borghi (marshall, VA) | March 3rd, 2012
    3/3/12 it started off with my 2008 1100 vstar with 17,000 miles having a lot of issues with most of them at starting. at the said mileage the one way starter clutch blew up.then talking ta several people finallly found maxair.most impressed with the way he helped me with problems and explaining it i put my trust in him and my freind steve who does all my work. i purchased the preditor pro,pro idle mixture screws,max csr kit,flame wires and ais removal plugs. everything went on easy folling the instructions. hit the starter button and that bike never even fired up so fiercly like that.the throttle responce is unbelievable and it seems never to end. every v-star should be set up like this.and not to mention the new sound in the exhaust,oh my god !!!! AWSOME PRODUCTS GUYS.. thanks for being there and thanx to steve if you ever read this testimonial.
    Verified Buyer
    Great Product
    5
    Jon Ehrhart (Fernandina Beach, FL) | December 31st, 2011
    I installed this intake along with the CSR, FlameWires, AIS removal kit and Maxmix screws. Love how the bike starts, runs and looks with these add ons. I also installed the Cobra 2 into 1 pipes and oil filter relocation kit. The transformation of the bike has been amazing. I did all this about 6 months ago and have not had any issues at all. Thanks Max for a great product.
    Verified Buyer
    Very Pleased!!!
    5
    Scott (Hinesville, Ga) | December 9th, 2011
    I purchased the Maxair Preditor Pro Kit about a year ago for my 2005 Vstar 1100 Silverado. I'm very paticular when it comes to perfection on a motorcycle. I have and extensive training and history working on motorcycles. I shopped and did a lot of research on intake filters and jet kits and decided on the Maxair Kit. It is the best quality and deal out there. I'm running the Maxair kit with Cobra slash cut slipons. I am very pleased with the performance boost in the bike...it pulls harder, runs smoother and even cooler! The kit is very easy to install for a "do it yoruselfer" Just follow the very clear instructions provided and ask for technical support if you need it. I have recommended the Maxair Kit to other friends who have ordered and installed it on their V-stars and they are pleased also. If your looking for a performance upgrade this is the best way to go! You get the most for your money with the best design on the market.
    Verified Buyer
    The best of everything
    5
    Gus Perrin (Blackland, TX) | April 16th, 2011
    Purchased, Mazair Predator Pro Kit, MaxMix Thumb screws, Predator Pro Jet kit and the Max CSR Kit. After installation...the transformation of the bike is AWESOME...more power and better response. But the best is the Tech support and the commitment to quality products. Maxair DOES DELIVER. I have never encountered a company with the dedication to customer satisfaction as Maxair. The value of the dollar spent to product quality and customer service cannot be measured. Thank you Maxair, I am a customer for life.
    Verified Buyer
    Maxair Predator Pro for 2006 1100V Star
    5
    Roland Sheriff (Swansea, MA) | March 20th, 2011
    I did the research 2yr ago and read the pros and cons on jet kits and other mods. I emailed Maxair and immediately got a call from the owner addressing my concerns. I went with the Predator Pro kit and praise Maxair to this day. I opted for older mufflers w/o cats and remover 2 baffles on each. Very pleased with the outcome and look forward to doing more business with Maxair. Roland Ma. USA
    Verified Buyer
    Absolutely Amazing!!!
    5
    ´╗┐Bill Benito (Winder, GA) | October 25th, 2010
    Installed the kit in my 02 Vstar already had Cobra shotguns on it and was absolutely amazed at the power. The mod was relatively simple and the instructions were excellent. I also removed the AIS and replaced some worn rubber hoses & intakes in the process. The power it unleashed is nothing short of miraculous. I never had to worry about a speeding ticket in the past, but now the bike will throw you back and easily do 100mph. My gas mileage is the same, but that's because I'm really heavy on the throttle right now. It's so much fun, like I've got a new bike. Do it, do it now!
    Verified Buyer
    All I can say is AWESOME!
    5
    William Hargrove (Haw River, NC) | October 23rd, 2010
    So easy to install, great instructions even a simple minded fool like me can do it.I installed the Maxmix screws,Preadator pro kit, ais removal, and flamewires, This transformed my 10 year old vstar 1100 into a new beast!Absolutely no install problem with these instructions, only had to ask one question.BTW anyone with an older bike check for arts wearing out and replace if needed, simple to do now rather than later. I look foward to ordering some barnett clutches and plates. Again it awoke the beast in my vstar , would highly recommend to anyone. Grat Company Great Products Great Owner!!!!!

    Related Products