Your Cart (0)
Thumbnail Filmstrip of FlameWires X2 Series : V Star 1100 - Replacement Battery / Starter Cables !!! Images
The FlameWires X2 Series: Yamaha VStar 1100
Send a Fireball to your starter !!!
Have you looked at your stock OEM battery cables lately. They are the weakest link in your electrical system. Take a good look the one that runs more than 3 feet to your starter. It's hard to fathom that the stock cables will even turn over your big 1100 cc V Twin Motor. It is a fact that the V Star 1100s are known for having starter issues, so this upgrade is a wise investment.
Throw in some corrosion and cold weather starting, on the flimsy stock cables and your starter is working overtime just to get enough power to crank the engine. Those stock cables make starting more difficult creating more wear and tear on your starter, battery and your engine.
Our legendary FlameWires X2 Series will help solve this problem!
- PLUG & PLAY install
- 24 Caret Gold plated heavy duty lug ends. Will NOT corrode!
- Marine Grade!
- Show quality- Battery Cable consists of oversized, fine stranded, tinned Oxygen Free Copper (99.99%) making this cable marine grade.
- Over 2000 strands, this is huge 4 gauge power wire
- Includes Ground cable with OEM plug for plug and play install
- Ends sealed with adhesive at 1000 Degrees to seal out water and contaminants (this is a must!!)
- Starter cable slightly longer than stock, for ease of installation
- Flames in picture for marketing purposes only. Wire does not have graphic flames.
Includes
- Starter Cable
- Solenoid Cable
- Ground cable with OEM plug for plug and play install (no replacement cable kit is complete without the ground)
Customer Reviews
5/5 Stars out of 20 Reviews
0
0
0
0
20
Jess Owen (Dallas, Tx)) | May 24th, 2010
Install was easy and bike fires right up effortlessly. Great upgrade for such a small cost. I also like having the peace of mind of having such heavy duty, weatherproof cables (no need for worry about corrosion with these) that will probably last forever and help my battery and starter last as well. Highly recomended!
Les Cole ((Paulden, AZ)) | February 15th, 2010
I just installed these wires on my 10 year old 1100. The bike was not starting sounding like the battery was low. I found the battery and starter wires cracked and showing age for sure. Ordered Maxair wire set ... Instructions were great .. wires are great. The old bike fires right up. These definitely will help out starting and they look great too!! I highly recommend these. If you look at your old wires you wonder how your bike ever started in the first place!
Eric Wallis ((Lafayette, Colorado)) | November 11th, 2009
For the last two weeks, I havent been able to start my bike, due to a grounding problem. After receiving and installing my FlameWires, my bike started right up. I had no problems with installation, and the quality and difference over stock is AMAZING! Thanks Maxair, I'll be ordering more soon!!
Randy Burd ((Rolla, MO)) | April 5th, 2009
I love the flame wires. They look very sharp. I had no problem installing them, even without a mini-me to help. What's that old adage; an ounce of prevention is worth a pound of cure? Thanks!
Harry Goza ((Emproia, Kansas)) | October 12th, 2008
I Installed the MAXAIR FLAMWWIRES on my 2006 V-Star 1100 Classic (slow to crank). The engine starts on first hit of the starter switch (No drag with notable quick starter response). The kit was complete and simple to install.
Lew Rossi ((Windsor, Ontario)) | August 12th, 2008
I would just like to say thanks for my new Flame wires. My 2000 Vstar was having starting problems first it was like dead battery, just clicking coming from starter relay. Checked battery 13.7 volts did load test and battery was fine after removing battery and replacing it I noticed a spark jumping from ground wire to frame moved wire and she started right up . After moving the wires around and testing them found stock wires old and brittel and sparks jumping all over them anywhere they would ground out. Ordered your new flame wires and did job in 1 hour Wow no problems truley plug and play. You guys are great easy to order from and fast . . thanks Lee great talking to you
Jesse Smith ((Wilmington, NC)) | June 15th, 2008
The high quality beefy, but flexible Flame Wires are a real plus helping the starter run easier and faster. Those who have added extra accessories like lights, radio, etc. will benefit even more from the increased capacity of these wires. Installation was easy, using a 5mm metric T-handle 6" long hex wrench made removing the ground wire from the engine a snap.
JOHN LUPTON ((MAPLE GROVE, MN)) | May 28th, 2008
Great product. What the bike always should have had, it carries plenty of juice to the starter. This should be the first thing to change on the bike.
Keith Manning ((Langley, British Columbia)) | May 21st, 2008
After running a second ground wire, and replacing the battery,(which could still start may car) then checking all connections for corrosion I thought that I finally had the answer, that lasted for a season and a half and the problem return and I was not going to change a perfectly good battery again. Then I received a e-mail form maxair and then every-thing made sense, I was a little mad a my-self for not thinking of it, I ordered it right away, had to do a little modifying on the install, but have not had the problem any more and it was cheaper than having to buy another battery. Thank-You Maxair for another quality product. Keith Manning
John Beinarauskas ((Batavia, IL)) | March 14th, 2008
The weakest link Is a bad ground. My V-Star 1100 is equipped with driving lights,heated grips, electric vest, CB radio, FM/CD stereo and auxiliary LED brake lights to draw down the electrical system. No surprise that I would see slow starts after taking a break or stopping for gas. But no longer, simply bolt on the Maxair Flamewires and the engine jumps to life at the push of a button. Fit and finish are great. Instructions are straight forward. No longer the weakest link.